Your motorcycle can end up looking cooler if you give it a fresh coat of paint. But in order for that to happen, you need to start by getting the right materials for the job. With so many alternatives available, what brand of paint should you settle for?
Not a fan of reading long article? Here’s a handy top 6 list that you can use to make an informed choice.
Table of Contents
Comparing Motorcycle Paint
|Dupli-Color Paint-Shop BSP200
|4.1 x 4.1 x 4.8 inches
|ColorRite Yamaha Motorcycle Spray Paint
|PJ1 16-GLS Gloss Black Epoxy Spray Paint (Aerosol
|6.4 x 2.8 x 7.7 inches
|VHT ESP903007 Satin Black Engine Case Paint Can
|2.6 x 2.6 x 8 inches
|House of Kolor BC11 Cinder Red 12-Ounce Aerosol Spray
|PJ1 16-WKL Wrinkle Black Spray Paint
|7.8 x 2.6 x 2.6 inches
Top Motorcycle Paint
Are you looking for paint for the exterior of your vehicle or motorcycle?
Dupli-Color Paint-Shop is a professional-grade paint. Professional grade paints are manufactured using better quality materials than other paints.
There are many advantages to this paint. First and foremost, the paint is manufactured and packed pre-thinned. Therefore, no determining thinning ratios. It is easy to use it, just putting it in the spray gun and getting the job done. In addition, it is cheaper to buy this than buying rattle spray cans.
It is important to note that it is quite challenging to use professional-grade paint if you don’t have technical qualifications in painting.
It is important to follow all the prep work before applying it on the motor. Failure to do so and the paint will disappoint you. It may look bad and start peeling off.
It requires several light coats plus a clear coat to have a perfect finish. You have about 19 colors to choose from
- Professional grade paint
- Already pre-thinned and therefore ready to spray
- Cheaper in the long-run compared to using rattle cans which may appear cheaper
- Nineteen colors to choose from
- It requires some technical expertise to be able to do proper prep works and finishes.
2. ColorRite Yamaha Motorcycle Spray Paint – Best Spray Paint For Motorcycle
ColorRite Yamaha Motorcycle spray paint is a product of ColorRite. It is an OEM paint that comes in an 11 OZ can. When using this paint, you skip the clear coat process and apply directly to your motorcycle, making the paint quite convenient to use and saving you time and money.
The product is recommended if your original motorcycle color was this color or it was changed to this color.
It is important to know the specific color name of your paint. Otherwise, it is advisable to use a paint selector to ensure accuracy, especially for touch-up jobs. You need the patched up area to resemble the rest of the motorcycle.
A package includes a factory matched paint can, one aerosol of clearcoat for a durable finish. And also one can of base-coat if the color needs it.
- Excellent for touch up paint jobs
- Perfect color match to OEM
- You don’t need a clear coat before applying the paint
- You save on time and money of buying a clear coat paint
- Check your color with the manufacturer. This is specific to those who want this color only.
- Painting requires some technical know-how
3. PJ1- Black Gloss Epoxy Spray Paint (Aerosol), 16-GLS 12 oz
PJ1- Black Gloss is a durable and tough paint ideal for painting motorcycles and vehicles. The paint comes in a 12 oz can. Basically, the more you buy, the cheaper the cost per bottle gets.
Applying the paint is easy. In addition, it is easy to wash off dirt surfaces with this paint. You simply wash with soap and water.
The paint maintains your motor well because the paint doesn’t chip, peel or rub off. In addition, the pain protects your car from corrosion and rust.
It is not advisable to buy this can if you are painting the exterior of an entire car. You will need many rattle cans, and it will end up being very expensive. The can is recommended if you are doing a touch-up paint job or painting a motorcycle.
Before buying, confirm if this is the color you need.
- Protects your car from corrosion and rust
- High gloss finish
- The paint doesn’t peel, chip or rub-off easily
- Only applicable to those who want color black paint. Other colors can be ordered from the manufacturer
- Painting requires having some technical knowledge
4. VHT Black Satin ESP903007 Engine Case Can Paint – 11 oz.
Are you looking for an engine paint, paint for an engine accessory or paint that can withstand heat and chemicals? VHT Black Satin is a paint manufactured from ceramic resins and urethane and has many features and benefits.
VHT Black Satin paint has superior heat and chemical resistance properties and therefore a durable paint. It can resist heat up to 550° F. The paint protects your engine or engine accessories from rust, chemicals, salt spray, and corrosion.
It is a satin finish high-temperature paint. It is developed for two and four stroke motorcycle engine cases.
The color will not peel, flake or crack. It is an easy-to-apply paint that dries in about one hour and dry to touch in thirty minutes.
If you need other colors other than black, contact the manufacturer or other resellers.
The paint requires technical know-how on preparation, primer, and coating.
- Factory match color
- Heat and chemical resistant
- Easy to dry
- Careful prep to avoid disappointments is required to ensure proper adhesion and proper curing.
- Requires technical painting know-how to use it well
House of Kolor Cinder Red is an aerosol spray that is reduced with RU311 Medium Reducer (2:1). The paint is offered in ultra-fine metallic or coarse.
The paint is a universal basecoat can be used as a final finish or used as a base for doing candy jobs. The chemical makeup allows it to be top coated with either urethane enamel or acrylic lacquer.
The paint is manufactured as a co-polymered urethane system. It, therefore, has characteristics of lacquer, and yet it can perform like a urethane. Therefore, you get a urethane and lacquer in one product.
The paint is made with high-grade metallics and pearls to give it outstanding brilliance. Organic pigments and not oxides are used in its production. Organic pigments make it offer full coverage in two to three to four coats when the correct ground coat is used. The paint dries fast.
If your intention is to do the painting yourself, you may need to first familiarize with a few basics.
- Ready to spray
- Special chemistry
- Dries fast
- Brilliant color
- It can be used as a basecoat or final finish
- Painting requires some technical know-how
6. PJ1 Wrinkle Black Spray Paint 16-WKL (Aerosol), 11 oz
This is a wrinkly paint. It is designed for use in any motorcycle component that fits with texture coatings like the cylinder and engine case.
The paint can withstand temperatures of up to 500° F. Therefore it is quite heat resistant.
The paint is easy to apply, and you get a durable textured finish on your motorcycle component.
The paint is durable and will protect your motorcycle. It resists scratching, and it does not chip off. In addition, it is easy to wash dirt and mud with just soap and water.
To achieve a uniform texture on your motorcycle component, heat the object after applying at low temperature.
You can buy a two pack, three pack or four pack at a much-reduced price.
- It is heat resistant
- Easy to maintain once applied. It does not chip or scratch, and it is easy to wash off dirt and mud.
- Unique textured look
- Quite affordable
- Many other colors available*Quite affordable
- Not eligible for international shipping
- You need some basic knowledge in painting to do a proper job
The Buying Guide – How to Buy Motorcycle Paint
If you get the right kind of paint, giving your motorbike a fresh new look doesn’t have to be difficult. So, let’s show you exactly what you need to consider when buying the paint to use.
First and foremost, you need to consider the depth of the color you settle for. In particular, you want to look for paint which is specially formulated to provide a deep, rich and true color.
Besides that, think about the number of coats you’d like to apply. We’d recommend going for paint that enables you to hide flaws with the fewest coats possible.
Self-priming paints are particularly good at this, although they normally retail at a premium.
Last but not least, always make sure that the paint you settle for can withstand the impact of being cleaned severally. Basically, the shinier the finish of your paint gets, the easier it normally is to clean.
Which One Is The Best?
The Dupli-Color BSP200 line of paints is, no doubt, one of the popular ones on retail currently. It’s easy to see why the company stands out. Its lineup of paints offers plenty of color options. Best of all, we like the fact that the company has remained consistent with the levels of quality they’ve attained.
There’s more to paintwork than just applying a fresh coat of paint on your motorcycle. Indeed, you need to look closer to ensure that you get just the right kind of components for the job. Fortunately, for you, you don’t have to look any further as our list has the kind of variety you need to do a nice job.
I’m Anthony King, a systems integration, automobile technician & automotive expert who earned his bachelor’s and master’s in mechanical engineering and an MBA from the University of Michigan, Ann Arbor. I worked on pioneering technologies from the beginning of his career.